fbpx
Languages:
ruheesen

Geomembrane

Ginegar’s Super Seal™ Geomembranes are L.D.P.E. and H.D.P.E. highly-advanced liner films intended for use in soil engineering applications such as reservoirs, waste disposal sites, subterranean structures, roadworks and other projects.

 

Super Seal™ Geomembranes are manufactured by Ginegar Plastic Products Ltd., an ISO 9001-2015 certified company, and a world-leading supplier of technologically-advanced, P.E. based solutions for agricultural and water management applications.

5/5 (1 Review)

Highly flexible

·         Highly flexible – for easier handling during sealing installation

Close Sun Cover

·         Superior strength – to withstand mechanical damage

Close Sun Cover

        Long-lasting – under various soil conditions

Close Sun Cover

         Highly resistant – to a wide range of chemical substances

Close Sun Cover

      Economical – offer excellent cost/benefit results

Geomembrane H.D.P.E Thickness Standart Width Standart Length Download
DataSheet
   1.0 mm 7.5 M 180 M
   1.5 mm 7.5 M 170 M
   2.0 mm 7.5 M 90 M
Close Sun Cover

Film usage Geomembrane Width Up to 16 meter Length As required

Property Test Method ASTM Units Test
Values
      Download
DataSheet
 
Thickness
Density (min.)
D 5199
D 1505
mm
g/cm³
0.75
0.945
1.0
0.945
1.5
0.945
2.0
0.945
 
Tensile properties
Yield strength – min.
Break strength – min.
Yield elongation – min.
Break elongation – min.
D 6693
Type IV

kN/m
kN/m
%
%

12
21
12
700

16
28
12
700

24
42
12
750
30
54
12
750
 
Tear resistance – min. D 1004 N 94 126 190 250  
Puncture resistance – min. D 4833 N 250 330 500 500  
Stress crack resistance D 5397 hr 500 500 500 500  
Carbon black content – min.  D 4218 % 2.0 2.0 2.0 2.0  
Carbon black dispersion D 5596 Cat 1 1 1 1  
Oxidative induction time (OIT) – standard D 3895 min >100 >100 >100 >100  
Oxidative induction time (HP-OIT) – high pressure
D 5885 min >400 >400 >400 >400  

* Tests are performed according to GRI Test method – GM 13 and comply with standard requirements

Close Sun Cover

Film usage Road Width Up to 16 meter Length As required

Property Test Method ASTM Units Test
Values
  Download
DataSheet
     
Thickness
Density (min.)
D 5199
D 1505
mm
g/cm³
1.0
0.945
1.0
0.945
 
Tensile properties
Yield strength – min.
Break strength – min.
Yield elongation – min.
Break elongation – min.
D 6693
Type IV

kN/m
kN/m
%
%

10
20
12
700

13
27
12
700

 
Tear resistance – min. D 1004 N 92 125      
Puncture resistance – min. D 4833 N 240 320      
Stress crack resistance D 5397 hr 500 500      
Carbon black content – min.  D 4218 % 2.0 2.0      

Typical Values: KLY – Klangley: 1Klangley=1Kcl/cm2: Unit of sun radiation at ground level.

Close Sun Cover
Close Sun Cover

Highly flexible – for easier handling during sealing installation

Close Sun Cover

Superior strength – to withstand mechanical damage

Close Sun Cover

Long-lasting – under various soil conditions

Close Sun Cover

  Highly resistant – to a wide range of chemical substances

Close Sun Cover

 Economical – offer excellent cost/benefit results

Property Thickness Max Width Download
DataSheet
   0.3 mm   15 M
   0.4 mm  14 M
   0.5 mm 14 M
Close Sun Cover

Film usage Low Tunnel Cover Width Up to 16 meter Length As required Thickness 500 microns

    Test Method  Units Values Download
DataSheet
     
Tensile strength at break

Elongation at break

MD
TD

MD
TD

ASTM D-882 MPa
MPa
%
%
23
24
600
700

 
Tear resistance MD
TD
ASTM D-1922 Gr./mm
Gr./mm

5000
10000

 
Dart drop   ASTM D-1709 gram N/A      
Light transmission in PAR   ASTM D-1003 % 0      

Anti-Drip                                                                    N/A

Close Sun Cover
Close Sun Cover
made in israel